Battery Program

Test Equipment

Products : Batteries : Test Equipment

Battery Testers

CPX-900PL

CPX-900PL

Replaces the EXP-800/L

  • The latest handheld battery/system analyzer from Midtronics!
  • Replaces the EXP-800/L 
  • Incorporates their exclusive Conductance Profiling technology: 10-amp load is applied for approx. 1 minute to evaluate battery Reserve Capacity health in addition to their proven battery Conductance test on Cranking health. 
  • This new testing technology makes for the most decisive and accurate testing available.
  • On-tool Wi-Fi and Bluetooth capabilities support flexible network capabilities.
  • Vehicle database-driven testing automatically sets correct battery parameters -can override if needed.
  • Year-Make-Model manual entry
  • Battery test range: 100-3000 CCA
  • Accurately tests discharged batteries
  • Rating standards: CCA, CA, DIN, SAE, IEC, EN, MCA, EN2
  • Modes: Automotive, Group 31, 4D/8D
  • Tests conventional lead-acid, AGM, AGM-Spiral, Gel, and EFB batteries
  • Displays VIN (if captured), rated & measured CCA, measured voltage, battery temp, cranking health, and reserve health (if needed; will not apply load if battery fails cranking health test); starting and charging system test results (if performed).
  • Starting system test captures voltage drop at start-up and cranking duration
  • Comprehensive charging system test captures voltage at idle & rev with vehicle loads on & off, and measures Diode-Ripple to ID bad diodes, stator damage or bad windings
  • DSP – Digital Signal Processing creates a digitized picture of the measured alternator output voltage to analyze the amplitude level & frequency of the diode-ripple pattern
  • Bad-cell detection & Reverse polarity protection
  • Tri-lingual: English, Spanish, and French-Canadian 
  • Customize the print header with your business info
  • High-quality 9.8’ field-replaceable cable/clamp set enables testing from the driver’s seat
  • Includes tester, cables, manual, and lead adapters
  • Available as CPX-900P with 4’ cable/clamp set
  • Optional dock for automated overnight s/w updates: CPX-901


Test Equipment MDX-700PHD

MDX-700P HD

H-D/Fleet 6/12V Digital Battery & 12/24V Electrical System Tester w/Printer

  • Battery test range: 100-2000 CCA (single batteries, pack test is greater)
  • Accurately tests discharged batteries
  • Rating standards: CCA, CA, MCA, JIS, SAE, EN, DIN, IEC
  • Modes: Automotive & Commercial Truck
  • Parallel bank test for time-saving PM test w/o disconnecting batteries (on good bank result)
  • Tests conventional, AGM, and Gel batteries
  • Displays measured voltage, measured CCA, and battery condition
  • Starting system test captures voltage drop at start-up and crank time
  • Recognizes air-start apps and jumps to charging system test
  • Extensive charging system test captures voltage at idle & rev with loads on & off, and measures Diode-Ripple to ID bad diodes, stator damage or bad windings
  • Tri-lingual: English, Spanish, and French-Canadian
  • Customize print header & footer
  • Bad-cell detection& Reverse-polarity protection
  • Voltmeter mode for real-time voltage readings of starting & charging systems
  • QC mode – set minimum CCA and Voltage requirements to quickly assess a large quantity of batteries with the same rating
  • High-quality 15’ field-replaceable cable/clamps set enables testing from the cab
  • Includes tester, cables manual, case, and lead adapters
  • Available as MDX-700 HD (no printer) 


Test Equipment MDX-P300

MDX-650P SOH

6/12v Digital Battery & 12/24v Electrical System Tester w/Printer

  • Upgraded version of the MDX-650P at no additional cost! 
  • Adds these new features:
    • State-of-Health graph which helps give a better idea of battery condition
    • Larger clamps with wider spread for easier connections in-vehicle
    • Rubber boot gives it a more robust look & feel while truly adding protection
    • EFB (Enhanced Flooded Battery) Algorithm
  • Battery test range: 100-2000 CCA
  • Accurately tests discharged batteries
  • Rating standards: CCA, CA, MCA, JIS, SAE, EN, DIN, IEC
  • Modes: Automotive, Commercial Truck, Power-sports, Marine, Lawn & Garden
  • Tests conventional, AGM, and Gel batteries
  • Displays measured voltage, measured CCA, and battery condition
  • Starting system test captures voltage drop at start-up and crank time
  • Extensive charging system test captures voltage at idle & rev with loads on & off, and measures Diode-Ripple to ID bad diodes, stator damage or bad windings
  • Tri-lingual: English, Spanish, and French-Canadian
  • Customize print header & footer
  • Bad-cell detection & Reverse-polarity protection
  • Voltmeter mode for real-time voltage readings of starting & charging systems
  • QC mode – set minimum CCA and Voltage requirements to quickly assess a large quantity of batteries with the same rating (battery distribution, auto/light-truck fleets)
  • High-quality 10’ field-replaceable cable/clamp set enables testing from the driver’s seat
  • Midtronics’ intermediate level analyzer with built-in printer
  • Includes tester, cable/clamp set, rubber boot, manual, case, and lead adapters


Test Equipment MDX-P300

MDX-P300 12V

Digital Battery & Electrical System Tester W/Printer

  • Battery test range: 100-1400 CCA
  • Accurately tests discharged batteries
  • Rating standards: CCA, CA, MCA, JIS, SAE, EN, DIN, IEC
  • Modes: Automotive, Commercial Truck, Power-sports, Marine, Lawn & Garden
  • Tests conventional, AGM, and Gel batteries
  • Tri-lingual: English, Spanish, and French-Canadian
  • Customize print header with your business info
  • Bad-cell detection & Reverse-polarity protection
  • Displays measured battery voltage, measured CCA, and battery condition
  • Voltmeter mode for real-time voltage readings of starting & charging systems
  • Starting system test captures voltage drop at start-up
  • Basic charging system test captures voltage once engine is running
  • High-quality 3’ fixed cable/clamp set
  • Midtronics’ entry-level battery & system tester w/built-in printer
  • Includes tester with integrated cable/clamp set


Test Equipment MDX-PBT-300

PBT-300

12V Battery & Electrical System Tester

  • Battery test range: 100-1400 CCA
  • Accurately tests discharged batteries
  • Displays measured battery voltage, CCA, and condition LED
  • Voltmeter mode for real-time voltage readings
  • High/Low voltage capture and condition LED for easy starter/alternator analysis
  • Bad-cell detection & Reverse-polarity protection
  • Midtronics’ entry-level battery & system tester w/o printer
  • Includes tester w/integrated cable/clamp set


AMP-100

Portable Multi-Meter w/Amp-Clamp

  • Low-level DC Amp range ideal for parasitic drain
  • Measurements w/amp-clamp:
    • DC Amps: 0-40 & 0-200
    • AC Amps: 0-40 & 0-200
  • Measurements w/probes:
    • DC Volts: 400, Resolution: 0.1V
    • AC Volts: 400, Resolution: 0.1V
    • Resistance: 40# Ohm – 400# Ohm
    • Continuity Voltage: 0.4V
  • One-touch zero button sets reading to zero as a reference value or to eliminate the offset value caused by residual magnetism
  • Probes make it a useful tool for pinpoint diagnostics like shorts and voltage drops
  • Can also be used to troubleshoot AC-powered equipment and shop circuits
  • Small jaw size fits in tight spots; 3¾” digital LCD

Testing Uses:

To Test: Use: Position: Measuring:
Parasitic Drain Clamp 40A DC Current
Starter Draw Clamp 200A DC Current
Charging Current Clamp 200A DC Current
Battery Voltage Leads V DC Voltage
Charging Voltage Output Leads V DC Voltage
Wiring Voltage Drop Leads V DC Voltage
Diode/Stator Cond. Leads ~V,Hz AC Voltage, Frequency
ABS Brakes Output Leads Hz Frequency
Wire Continuity Leads (ohms) Resistance
Component Continuity Leads (ohms) Resistance
Circuit Continuity Leads (ohms) Resistance

 


Test Equipment MSP-070-2

MSP-070-2

12V / 70A Power Supply Charger

  • All-new unit designed from the ground up by Midtronics
  • 70-Amp Power Supply Charger ideal for ECU flash reprogramming delivers under the most demanding, high-draw applications such as BMW
  • MOSFET technology for a “clean” power supply
  • Maintains up to 14.4V output at max load
  • Settings of 13.2, 13.6, and 14.4V max output settings for greater flexibility & coverage
  • Safe for use on Flooded, AGM, Gel and Enhanced Flooded Batteries
  • Fully regulated DC output prevents overcharging
  • Switch-mode design reduces heat build-up
  • Reverse-polarity protected
  • Thermally regulated fan cooling
  • High-quality cable/clamp set is field-replaceable
  • Includes 70-amp MSP unit, 2-meter cable/clamp set, power cord
  • Operates on common 110V 15A circuit (20A recommended)