Mighty Auto Parts Logo Mobile

Battery Testers

Be sure to test every battery as part of your regular, thorough vehicle inspection process to keep your customers safe out there on the road.

  • The average life span of a car battery: 24-30 months
  • 75% of consumers never had their battery checked before breakdown
  • 30% of batteries in use today need replacement
  • 75% of consumers will purchase once shown test results
  • AAA reports that 66% of their service calls are due to batteries
  • Mighty offers a $5 incentive to tech by selling Mighty Batteries
Contact a Mighty Rep
Battery & Electrical System Analysis Tool

Autel • Battery & Electrical System Analysis Tool

Part Number: MaxiBAS BT506

The BT508 is a powerful and lightweight Battery & Electrical System tester that is Bluetooth enabled and works with Autel’s Battery Test app.

  • Supports in-vehicle and out of vehicle testing passenger vehicle batteries
  • Test 6 and 12 volt batteries: 100 – 2000 CCA
  • Test 12 and 24 volt cranking/charging systems
  • Tests: Flooded, AGM, AGM Spiral, EFB and GEL batteries
Battery & Electrical system tester

Autel • Battery & Electrical system tester

Part Number: MaxiBAS BT508

The BT508 is a powerful and lightweight Battery & Electrical System tester that is Bluetooth enabled and works with Autel’s Battery Test app.

  • Supports in-vehicle and out of vehicle testing passenger vehicle batteries
  • Test 6 and 12 volt batteries: 100 – 2000 CCA
  • Test 12 and 24 volt cranking/charging systems
  • One-touch battery registration
  • Illustrated instruction guides for battery positioning and testing
  • AutoVIN
Battery & Electrical System Analyzer

Autel • Battery & Electrical System Analyzer

Part Number: MaxiBAS BT608

The BT608 is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery’s cold-cranking ability and reserve capacity.

  • Supports in-vehicle and out of vehicle testing passenger vehicle batteries
  • Test 6 and 12 volt batteries: 100 – 3000 CCA
  • Test 12 and 24 volt cranking/charging systems
  • One-touch battery registration
  • Illustrated instruction guides for battery positioning and testing
  • Built in thermal printer
  • Read and erase codes of all available systems
  • No annual update fee
Battery & Starting System Analyzer

DHC® • Battery & Starting System Analyzer

Part Number: BT2100

The BT2100 is an advanced diagnostic tool that is accurate, fast, and affordable. Utilizing an app and internal Bluetooth, the test results can be sent to the customer via text or email message.

  • Easy-to-Read intuitive interface
  • Complete test report & fully customizable  printout
  • Advanced HTML interface to fully utilize test data
  • Enhanced Flooded Battery (EFB) & AGM test availability
  • Virtual keyboard
  • Easy-link communication to PC via USB
  • Wireless Transmission
  • DHC Syn BT2100 mobile app + Bluetooth
  • Detachable cable for easy maintenance
  • 12-month limited warranty
Battery & Starting System Analyzer

DHC® • Battery & Starting System Analyzer

Part Number: BT2000

The DHC BT2000 battery tester will give your customers a selling edge offering peace of mind when showing their customer’s the batter health and state of charge. This tester gives your customers the power to suggest battery replacement as preventative maintenance rather than emergency replacement, and it can even print the results to show them.

  • Easy-to-Read intuitive interface
  • Complete test report & fully customizable  printout
  • Advanced HTML interface to fully utilize test data
  • Enhanced Flooded Battery (EFB) & AGM test availability
  • Test START-STOP system technology with ease
  • Replaceable / Detachable test cable
  • Reverse Polarity protection
  • Heavy duty blow molded plastic case for durability
  • Temperature sensor
  • 12-month limited warranty
Battery & Starting System Analyzer

DHC® • Battery & Starting System Analyzer

Part Number: BT2010

  • Easy-to-Read intuitive interface
  • Complete test report & fully customizable  printout
  • Enhanced Flooded Battery (EFB) & AGM test availability
  • Test START-STOP system technology with ease
  • Replaceable / Detachable test cable
  • Reverse Polarity protection
  • Heavy duty blow molded plastic case for durability
  • 12-month limited warranty
Battery & Starting System Analyzer

DHC® • Battery & Starting System Analyzer

Part Number: RT777PRO

  • Easy-to-read, intuitive interface with color-coded screen based on test results
  • Complete test report and fully customizable printout
  • Flooded, EFB, AGM, and Start/Stop battery testing in or out of the vehicle
  • Replaceable / detachable test cable
  • Enhanced, robust printer and cover
  • Reverse polarity protection
  • Heavy duty blow molded plastic case for durability
  • 12-month limited warranty
Golf Cart Battery Tester

DHC® • Golf Cart Battery Tester

Part Number: BT2000EV

  • Easy-to-Read Intuitive Interface
  • Complete Test Report
  • Advanced HTML Interface to Fully Utilize Test Data
  • “SPEED CHECK” on Deep Cycle Batteries by OE Numbers
  • Fully Field Upgradeable
Heavy Duty Truck Battery & System Tester

DHC® • Heavy Duty Truck Battery & System Tester

Part Number: BT2000HD

  • Easy-to-Read Intuitive Interface
  • Complete Test Report & Fully Customizable Printout
  • Advanced HTML Interface to Fully Utilize Test Data via USB Cable
  • “SPEED CHECK” To Test Battery Packs, Individual Batteries and Electrical Systems
  • 12-Month Limited Warranty
CPX-900PL Battery Tester

Midtronics® • CPX-900PL Battery Tester

Part Number: CPX-900PL

Replacing the EXP-800/L, this is the latest handheld battery/system analyzer from Midtronics! This new testing technology makes for the most decisive and accurate testing available. Battery test range: 100-3000 CCA.

  • Incorporates their exclusive Conductance Profiling technology: 10-amp load is applied for approx. 1 minute to evaluate battery Reserve Capacity health in addition to their proven battery conductance test on cranking health
  • This new testing technology makes for the most decisive and accurate testing available
  • On-tool Wi-Fi and Bluetooth capabilities support flexible network capabilities
  • Vehicle database-driven testing automatically sets correct battery parameters -can override if needed
  • Year-Make-Model manual entry accurately tests discharged batteries
  • Rating standards: CCA, CA, DIN, SAE, IEC, EN, MCA, EN2
  • Modes: Automotive, Group 31, 4D/8D
  • Tests conventional lead-acid, AGM, AGM-Spiral, Gel, and EFB batteries
  • Displays VIN (if captured), rated & measured CCA, measured voltage, battery temp, cranking health, and reserve health (if needed; will not apply load if battery fails cranking health test); starting and charging system test results (if performed)
  • Starting system test captures voltage drop at start-up and cranking duration
  • Comprehensive charging system test captures voltage at idle & rev with vehicle loads on & off, and measures Diode-Ripple to ID bad diodes, stator damage or bad windings
  • DSP – Digital Signal Processing creates a digitized picture of the measured alternator output voltage to analyze the amplitude level & frequency of the diode-ripple pattern
  • Bad-cell detection & Reverse polarity protection
  • Tri-lingual: English, Spanish, and French-Canadian
  • Customize the print header with your business info
  • High-quality 9.8’ field-replaceable cable/clamp set enables testing from the driver’s seat
  • Includes tester, cables, manual, and lead adapters
  • Available as CPX-900P with 4’ cable/clamp set
MDX-700P HD Battery Tester

Midtronics® • MDX-700P HD Battery Tester

Part Number: MDX-700P HD

H-D/Fleet 6/12V Digital Battery & 12/24V Electrical System Tester w/ Printer. Battery test range: 100-2000 CCA (single batteries, pack test is greater).

  • Accurately tests discharged batteries
  • Rating standards: CCA, CA, MCA, JIS, SAE, EN, DIN, IEC
  • Modes: Automotive & Commercial Truck
  • Parallel bank test for time-saving PM test w/o disconnecting batteries (on good bank result)
  • Tests conventional, AGM, and Gel batteries
  • Displays measured voltage, measured CCA, and battery condition
  • Starting system test captures voltage drop at start-up and crank time
  • Recognizes air-start apps and jumps to charging system test
  • Extensive charging system test captures voltage at idle & rev with loads on & off, and measures Diode-Ripple to ID bad diodes, stator damage or bad windings
  • Tri-lingual: English, Spanish, and French-Canadian
  • Customize print header & footer
  • Bad-cell detection & Reverse-polarity protection
  • Voltmeter mode for real-time voltage readings of starting & charging systems
  • QC mode – set minimum CCA and Voltage requirements to quickly assess a large quantity of batteries with the same rating
  • High-quality 15’ field-replaceable cable/clamps set enables testing from the cab
  • Includes tester, cables manual, case, and lead adapters
  • Available as MDX-700 HD (no printer)
MDX-650P State-of-Health Battery Tester

Midtronics® • MDX-650P State-of-Health Battery Tester

Part Number: MDX-650P SOH

6/12V Digital Battery & 12/24V Electrical System Tester w/ Printer. This is the upgraded version of the MDX-650P at no additional cost!

Adds these new features:

  • State-of-Health graph which helps give a better idea of battery condition
  • Larger clamps with wider spread for easier connections in-vehicle
  • Rubber boot gives it a more robust look & feel while truly adding protection
  • EFB (Enhanced Flooded Battery) Algorithm Battery test range: 100-2000 CCA
  • Accurately tests discharged batteries
  • Rating standards: CCA, CA, MCA, JIS, SAE, EN, DIN, IEC
  • Modes: Automotive, Commercial Truck, Power-sports, Marine, Lawn & Garden
  • Tests conventional, AGM, and Gel batteries
  • Displays measured voltage, measured CCA, and battery condition
  • Starting system test captures voltage drop at start-up and crank time
  • Extensive charging system test captures voltage at idle & rev with loads on & off, and measures Diode-Ripple to ID bad diodes, stator damage or bad windings
  • Tri-lingual: English, Spanish, and French-Canadian
  • Customize print header & footer
  • Bad-cell detection & Reverse-polarity protection
  • Voltmeter mode for real-time voltage readings of starting & charging systems
  • QC mode – set minimum CCA and Voltage requirements to quickly assess a large quantity of batteries with the same rating (battery distribution, auto/light-truck fleets)
  • High-quality 10’ field-replaceable cable/clamp set enables testing from the driver’s seat
  • Midtronics’ intermediate level analyzer with built-in printer
  • Includes tester, cable/clamp set, rubber boot, manual, case, and lead adapters
MDX-P300 12V Battery Tester

Midtronics® • MDX-P300 12V Battery Tester

Part Number: MDX-P300 12V

Digital Battery & Electrical System Tester w/ Printer and a battery test range of 100-1400 CCA.

  • Accurately tests discharged batteries
  • Rating standards: CCA, CA, MCA, JIS, SAE, EN, DIN, IEC
  • Modes: Automotive, Commercial Truck, Power-sports, Marine, Lawn & Garden
  • Tests conventional, AGM, and Gel batteries
  • Tri-lingual: English, Spanish, and French-Canadian
  • Customize print header with your business info
  • Bad-cell detection & Reverse-polarity protection
  • Displays measured battery voltage, measured CCA, and battery condition
  • Voltmeter mode for real-time voltage readings of starting & charging systems
  • Starting system test captures voltage drop at start-up
  • Basic charging system test captures voltage once engine is running
  • High-quality 3’ fixed cable/clamp set
  • Midtronics’ entry-level battery & system tester w/ built-in printer
  • Includes tester with integrated cable/clamp set
PBT-300 Battery Tester

Midtronics® • PBT-300 Battery Tester

Part Number: PBT-300

12V Battery & Electrical System Tester with a battery test range of 100-1400 CCA.

  • Accurately tests discharged batteries
  • Displays measured battery voltage, CCA, and condition LED
  • Voltmeter mode for real-time voltage readings
  • High/Low voltage capture and condition LED for easy starter/alternator analysis
  • Bad-cell detection & Reverse-polarity protection
  • Midtronics’ entry-level battery & system tester w/o printer
  • Includes tester w/ integrated cable/clamp set
AMP-100 Battery Tester

Midtronics® • AMP-100 Battery Tester

Part Number: AMP-100

Portable Multi-Meter w/ Amp-Clamp.

  • Low-level DC Amp range ideal for parasitic drain
  • Measurements w/ amp-clamp: DC Amps: 0-40 & 0-200 AC Amps: 0-40 & 0-200
  • Measurements w/ probes: DC Volts: 400, Resolution: 0.1V AC Volts: 400, Resolution: 0.1V
  • Resistance: 40 Ohm – 400 Ohm
  • Continuity Voltage: 0.4V
  • One-touch zero button sets reading to zero as a reference value or to eliminate the offset value caused by residual magnetism
  • Probes make it a useful tool for pinpoint diagnostics like shorts and voltage drops
  • Can also be used to troubleshoot AC-powered equipment and shop circuits
  • Small jaw size fits in tight spots; 3¾” digital LCD
MSP-070-2

Midtronics® • MSP-070-2

Part Number: MSP-070-2

12V / 70A Power Supply Charger. All-new unit designed from the ground up by Midtronics.

  • 70-Amp Power Supply Charger ideal for ECU flash reprogramming delivers under the most demanding, high-draw applications such as BMW
  • MOSFET technology for a “clean” power supply
  • Maintains up to 14.4V output at max load
  • Settings of 13.2, 13.6, and 14.4V max output settings for greater flexibility & coverage
  • Safe for use on Flooded, AGM, Gel and Enhanced Flooded Batteries
  • Fully regulated DC output prevents overcharging
  • Switch-mode design reduces heat build-up
  • Reverse-polarity protected
  • Thermally regulated fan cooling
  • High-quality cable/clamp set is field-replaceable
  • Includes 70-amp MSP unit, 2-meter cable/clamp set, power cord
  • Operates on common 110V 15A circuit (20A recommended)